Invisible zipper foot - 412687045 -

Foot for invisible hinges

The invisible zipper must always be mounted before performing the central seam on the garment. For this purpose, a special foot is used with two grooves at the bottom where the two halves of the zipper are inserted to hold it in place while sewing. Buy a hinge at least 3 cm longer than the corresponding opening.

1. Mark the length of the opening on the seam edge and on the zipper itself. The excess length should remain at the bottom of the hinge.

2. Apply the foot for invisible zippers. Select the straight point with center needle position. Length 2.5 - 3.0.

3. Open the zipper.

4. Place the right half of the zipper on the two parts of fabric joined straight against straight. The zipper should be located on the seam, and its latch more than 2 cm below the cut edge of the fabric.

5. Press the zipper with your finger and lower the foot, making sure that the two halves are inserted into the right groove under the foot.

6. Adjust the position of the needle to align with the guide on the front of the foot. Stitch back and sew. Stop at the mark on the zipper and on the seam edge, make the stitch back to fix the seam.

7. Place the left half of the zipper straight against straight on the left side of the head. Lower the foot with the left groove above the teeth of the zipper. Make sure the needle is perfectly aligned with the guide on the front of the foot. Repeats the operations performed for the first side.

8. Pull the slider to close the zipper. Combine the fabric and zipper on the obverse. Apply the normal zipper foot to the left of the needle.

Adjust the needle position on the right. Start working in the fixed seam and sew under the zipper. If the zipper is too long, sew between the teeth 3 cm below the part inserted into the fabric. Cut off the excess zipper under the overhead seam.

COMPATIBLE WITH SEWING AND EMBROIDERY MACHINES HUSQVARNA VIKING CATEGORY :

1) ORCHID, 1250, #1+, 1200, 1100, 1090, 1070, 1070 S, 1050.

2) 990 S, 990, 980, 960, 950 S, 950, 945, 940.

3) 630, 620, 610, 190, 185, 180, 150, 120.

4) 105, 100, 95, 90.

5 ) PRELUDE 360, PRELUDE™™ 340, DAISY™ 335, 330, 325, 320, 315, 310, HUSQVARNA VIKING® 250, 230, 225/215, 210, 205, SCANDINAVIA™ 100, EDEN ROSE™ 250M, TRIBUTE™ 140M, EMERALD™ 122, 118, 116.

6 ) PLATINUM 955 E, 950 E, PLATINUM™™ Plus 775, 770, 755 Quilt, 750 Quilt, 735, 730, 715, ROSE™ 605, 600, IRIS, LILY™ 555, 550, 545, 540, 535, 530, HUSQVARNA VIKING® 500, INTERLUDE™ 445, 435, FREESIA™ 425, 415,™
® HUSQVARNA VIKING 400, 350, SCANDINAVIA™ 400, 300, 200, EMERALD™ 203, 183. DESIGNER JADE™ 35. JADE™ 20.

7 ) DESIGNER DIAMOND Royale, DESIGNER DIAMOND deLuxe, DESIGNER DIAMOND, DESIGNER RUBY Royale™™, DESIGNER RUBY deLuxe™™, DESIGNER RUBY™ DESIGNER TOPAZ™ 50, 40, 30, 25, 20, DESIGNER SE,™ DESIGNER™™ SE
Limited Edition, DESIGNER I, II, QUILT DESIGNER, QUILT DESIGNER™™™ II, SAPPHIRE™ 960Q, 930, 875Q, 870Q, 855, 850, 835, 830, OPAL™ 690Q, 670, 650, EDEN ROSE™ 250C, TRIBUTE™ 140C.

8) Husqvarna Viking EPIC, Husqvarna Viking EPIC 980Q