Husqvarna Viking 620117896 Elastic foot for S21 and S25

The elastic presser foot guides and stretches the narrow (6-12 mm) elastic bands as you sew them onto the fabric. It is perfect for sportswear, lingerie and other techniques for inserting elastic bands.

Recommended points :

Four-wire overlock.
Tight three-wire overlock.

Settings:

Use the default settings ( See instruction manual )

Guidelines:

1. Prepare the serger for the desired stitch.
2. Loosen the screw on the front of the presser foot to apply elastic bands to reduce the
tension on the roller. Insert the elastic band into the presser foot.
3. Fit the presser foot and pull the elastic until it reaches behind the presser foot.
4. Tighten the tensioning screw to tighten the elastic.
5. Turn the handwheel to sew a few stitches and secure the elastic.
6. Place the fabric under the presser foot and sew the elastic and fabric together.
7. Check the stitch and adjust the tension if necessary.

Note: To adjust the strap tension:

• Turn the tensioning screw to the right to increase the tension
• Turn it to the left to loosen it.
• Be careful not to pull the fabric while sewing.