The fastening attachment allows for a quick change of various types of binders and hemmers. Indispensable for e.g. the TEXI foot 0014, the TEXI 2002 trimmer and the TEXI hemmers 2003-2007. Possibility of adjusting the seam distance from a tape or edge of the hemmed material.
The Brother Hat Frame offers a larger embroidery area, allowing you to embroider up to 270 degrees.
- Important: This accessory includes ONLY the frame. If you do not already have the frame conductor and mounting mask, choose the PRPCF1 set.
- Total embroidery area 60 x 360 mm.
- Perfect for preparing the next embroidery and improving production times
- Compatible with PR1055X, PR1050X, PR1000e, PR1000
Foot for ribs with 7 scales. With this foot you can create very thin ribs close or spaced. A twin needle of 1.6 mm is required (for thin and round folds), or from 1.8 mm up to a maximum of 2.0 mm for higher ribs.
With the HUSQVARNA VIKING cord application foot it is easy to embellish the fabrics with ornamental yarns, applied by embroidering and sewing freehand. Two different feet allow you to use a variety of drawstrings. The product contains detailed instructions.
Its special coating at the bottom is particularly suitable for sewing difficult-to-carry materials such as leather, foam, plastic, faux leather and plastic-coated fabrics.
Bobbin (plastic, flat) for most home sewing machines. Set of 3 pcs.
The bobbins are sold cordless.
Beader, tape width 5/6"" (22 mm), after sewing 7/32"" (5.5 mm). To attach this binder, you need the TEXI 2001 handle.
Suitable for most household sewing machines (Janome, Texi, Bernina, Brother, Łucznik, Elna, Toyota, Husqvarna etc.) with rotary hook and shuttle hook.
The Brother hat frame set offers a larger embroidery area, allowing you to embroider up to 270 degrees.
- It includes a 60 x 360 mm wide hat frame, the conductor of the frame and the mounting mask.
- Total embroidery area 60 x 360 mm
- Compatible with PR1055X, PR1050X, PR1000e, PR1000
Foot for ribs with 3 scales. With this foot you can create very thin ribs close or spaced. A twin needle of 1.6 mm is required (for thin and round folds), or from 1.8 mm up to a maximum of 2.0 mm for higher ribs.
Guide strips, trimmings, and cords into the trimming foot, embroidery foot, or cording foot.
With this foot you can achieve perfect appliqués, sewn with a dense satin stitch. The two short ends on the front of the presser foot increase the visibility of the seam. You can use it with a cotton crochet thread to gather a fabric or to sew a cord.
Bobbin (metallic, convex) for most home sewing machines with rotating looper and bobbin case type TEXI 3008. Set of 3 pcs.
Hemmer for narrow hems 1/10"" (2.5 mm). Perfect for hemming ruffles, ruffles etc. To attach this hemmer, you will need the TEXI 2001 handle.
Suitable for most household sewing machines (Janome, Texi, Bernina, Brother, Łucznik, Elna, Toyota, Husqvarna etc.) with rotary hook and shuttle hook.
Exclusive Hoopnetic Brother magnetic frame. Easily frame and embroider thick materials. Avoid moving and rearranging fabric in the frame when attaching embroidery or embroidering on large areas. Simply slide the fabric over the loom to move on to the next embroidery area.
Foot for ribs with 5 scales. With this foot you can create very thin ribs close or spaced. A twin needle of 1.6 mm is required (for thin and round folds), or from 1.8 mm up to a maximum of 2.0 mm for higher ribs.
Stem Foot for Sewing and Embroidery Machines Husqvarna Viking
The double-level topstitching foot with IDT guides your topstitching and seams on board perfectly. The bottom of the presser foot is designed to glide along the folded edge, and will give you beautiful topstitching on your project.
Bobbin (metallic, convex) for most home sewing machines with rotating looper and bobbin case type TEXI 3008. Set of 3 pcs.
1/4"" (6.5 mm) hemming Perfect for hemming dresses, curtains, mesh curtains, etc. To attach this hemmer, you will need the TEXI 2001 handle.
Suitable for most household sewing machines (Janome, Texi, Bernina, Brother, Łucznik, Elna, Toyota, Husqvarna etc.) with rotary hook and shuttle hook.
The roller foot allows you to sew uneven fabrics in leather, velvet and fluffy or eyelet fabrics. Straight stitch, zig zag and other utility and decorative stitches forward.
The CandleWicking foot has a deep groove on the base, so you can pass over a thick spot (such as knots) without any problems.
3/8"" (9.5 mm) hemming Perfect for hemming dresses, curtains, mesh curtains, etc. To attach this hemmer, you will need the TEXI 2001 handle.
Suitable for most household sewing machines (Janome, Texi, Bernina, Brother, Łucznik, Elna, Toyota, Husqvarna etc.) with rotary hook and shuttle hook.
For maximum visibility of 6 and 3 mm straight seams. Equipped with guide signs to make the corners of the seams of 6 or 3 mm.
The Open Clear Foot with IDT is perfect for appliqués and other applications that require a very large view of the sewing area. An extra large opening at the front makes appliqués quick and easy.
5/8"" (16 mm) hemming Perfect for hemming dresses, curtains, mesh curtains, etc. To attach this hemmer, you will need the TEXI 2001 handle.
Suitable for most household sewing machines (Janome, Texi, Bernina, Brother, Łucznik, Elna, Toyota, Husqvarna etc.) with rotary hook and shuttle hook.
Sews leaving a perfect margin of 6 mm. The red stripes mark stitches at a distance of 6 and 3 mm in front and behind the needle. Straight stitch, length 2.0–2.5.
This foot guides, elastic curtains from 6 to 12 mm wide and applies them in one operation. It is used for sportswear, lingerie and other elastic insertion techniques.
7/8"" (22 mm) hemming Perfect for hemming dresses, curtains, mesh curtains, etc. To attach this hemmer, you will need the TEXI 2001 handle.
Suitable for most household sewing machines (Janome, Texi, Bernina, Brother, Łucznik, Elna, Toyota, Husqvarna etc.) with rotary hook and shuttle hook.
She quickly sews folds into medium-thick fabrics. Use it with the double needle. Straight point, length 2.5.
Making a border with a bias tape is a very simple method to give the edges of a fabric a clean and regular look. You must have a 24mm wide bias cut tape.
Decorate your project with different types of decorative yarns using the wide range of stitches Husqvarna Viking and the foot for special three-hole yarns.
The IDT Seam Guide Foot guides the seam perfectly when joining fabrics. The presser foot allows you to keep the seam allowance at the same distance from the edge at all times. .
Decorate your project with different types of decorative yarns using the wide range of stitches Husqvarna Viking and the foot for special three-hole yarns.
The guide foot with IDT provides a perfect guide for decorative topstitching. The foot has a "ruler" with an adjustable guide that allows you to place it wherever you want.
For Fantasigrams, festoons or 4-way points. Make beautiful edges and hems on your tablecloths. Transparent central part for maximum visibility of the seam.